MN MODEL MN168 Upgrade Parts Metal Kit

MN MODEL MN168 Upgrade Parts

• Product name: Metal Kit
• Quantity: 1set
• Applicable model: MN-RC MN168
• Color: Black, red, silver
• Material: 6061 aluminum
• Weight: 270g
• Note: Hydraulic shock absorber, built-in spring, has been refueled.

MN MODEL MN168 Upgrade Parts Metal Kit configuration and size:

1. 103.3mm x 56.2mm x 15mm Circuit board fixing bin
2. 73mm*56mm*10mm Tail beam
3. 50.6mm*55mm*12mm Motor fixed base
4. 72mm Long tie rod *4
5. 70.5mm Short tie rod*4
6. 24mm x 17.5mm x 10mm Shock absorber bracket
7. 72.5mm x 21.5mm x 25mm Front tie rod seat
8. 72.5mm x 21.5mm x 16.5mm Rear tie rod seat
9. the Steering tie rod can be adjusted from 91.5 to 101.5mm, the hole distance from 84mm to 94mm, and the aperture is 2.5mm
10. 25T Steering gear arm*1
11. Steering gear fixed tie rod*1 hole distance 52mm
12. Drive shaft aperture 4mm telescopic length 69.5mm-94mm
13. Shock absorber total length 62.6mm, the hole distance is 56mm, the stroke is 8mm, and the outer diameter is 11mm

How do I install the MN model MN168 upgrade component metal kit?

1. Prepare tools: Make sure you have the right tools such as screwdrivers and wrenches.
2. Clean the mounting surface: Remove oil and impurities to ensure the mounting surface is clean.
3. Position the kit: Align the metal kit accurately with the mounting position on the vehicle.
4. Fix the kit: Use screws or clips to securely fix the kit to the vehicle.
5. Check and adjust: Make sure the kit is installed in place without looseness or skewness.