MN MODEL MN128 Upgraded Parts Metal Drive Shaft 3

What are the characteristics of the MN MODEL MN128 RC CAR upgraded parts metal drive shaft?

1. High voltage and large capacity, both power and endurance;
2. Fast charging, saving precious time;
3. Lightweight design, flexible and easy to operate;
4. Long life and durability, lower cost of use.

How to install the MN MODEL MN128 RC CAR upgraded parts metal drive shaft?

1. Clean the chassis interface to ensure that there is no debris left
2. Remove the original drive shaft and mark the original direction
3. Align the universal joint and insert the metal drive shaft
4. Adjust the drive shaft angle to avoid excessive bending
5. Apply thread glue and fix the cross shaft screws
6. Tighten the fixing buckle according to the torque requirements
7. Manually turn the wheel hub to test the transmission smoothness
8. Test run at low speed to confirm that there is no abnormal vibration and noise

How to install MN MODEL MN128 metal upgrade parts?

1. Prepare the corresponding tools (RC repair tools)and the upgrade parts that need to be installed and replaced.
2. Install the upgrade parts correctly according to the tutorials and instructions.
3. Install the metal parts after applying anti-loosening glue to the screw holes.
4. Adjust the metal gear bite and tighten the screws.

If you have any other questions, please leave a message in time! ! !